3003 Aluminum Sheet Properties

3003 aluminum sheet belongs to an aluminum-manganese alloy, which contains a certain amount of manganese alloy inside, so its strength is higher than that of pure aluminum plate. Its specific gravity is 2.73. tensile strength is 150, yield strength is 145, shear resistance is 95 and elastic modulus is 69.

The tensile strength of 3003 aluminum plate is generally close to 160-170 mpa in H24 state, which is about 20% higher than that of 1060 and 1100 aluminum plate. It belong to the aluminum sheet with lower tensile strength and its price is also relatively cheap. Therefore, 3003 aluminum plate can be selected for products with a slight advantage in tensile strength.

Tensile strength is a parameter in mechanical properties. It refers to the highest value of breaking strength suitable for tensile testing machines. Tensile strength mainly reflects the breaking resistance and is an important indicator in mechanical properties.

The tensile strength of the 3003 aluminum plate refers to the maximum force before the aluminum plate is broken. After yielding to a certain extent, due to the rearrangement of the internal grains, the deformation resistance of the aluminum plate has been improved again. Although the deformation develops rapidly at this time, it can only be improved when the stress reaches the maximum. After that, the ability of the aluminum plate to resist deformation is significantly reduced, and a large plastic deformation occurs at the weakest point.

3003 aluminum cannot be heat-treated to be strengthened. It is hardened and set in a semi-cold state. It has good corrosion resistance and is easy to weld, but it is not very convenient in cutting. It can be polished.

Our production of 3003 aluminum plate is rolling processing, including hot rolling and casting rolling. During the hot rolling process, the internal structure of the aluminum plate has been recrystallized many times to break the fine and large grains in the casting state, which improves the performance of the aluminum plate. In terms of deep drawability, hot-rolled materials have incomparable advantages over cast-rolled materials.

3003 aluminum sheet is used to make stamping parts, models, shells, etc. The power battery shell made of 3003 aluminum alloy is impact-resistant, not easy to break and leak, and can meet the strength and rigidity requirements of the power battery shell, and the aluminum alloy has a small density and light weight, which can reduce battery weight and increase battery capacity density.

There are many kinds of rice cooker inner pots, such as black crystal, aluminum alloy, stainless steel, purple sand, etc. Different inner pots have differences, different service life, and of course prices are also different. The aluminum inner tank of the rice cooker generally adopts 3003 aluminum alloy plate. Welcome to leave message below to inquire aluminium alloy 3003 price.