What Are Uses of Aluminum Checker Plate 4x8

The 5 bar aluminum tread plate is made of aluminum plate through external mechanical processing. It is rolled with a roller press on the basis of an aluminum plate and a protruding pattern is formed on the surface of the aluminum plate. Aluminum checker plate 4x8 is a popular size. It refers to the ratio of the width to length of the aluminum sheet, which stands for 4’ and 8’. The size is 1219 mm x 2438 mm.

The aluminum checker plates account for the majority of automotive floor applications due to the excellent anti-slip performance. Because the surface is designed with a special pattern, it increases the friction resistance of the aluminum sheet, improves the reliability when walking, and effectively prevents accidental slipping. Whether in indoor or outdoor environments, non-slip aluminum tread plates provide a reliable and stable walking surface.

Many large trucks now use aluminum diamond plate to make tool boxes. The fenders of trucks are similar to those used on our cars, except that the wheels of trucks are wider, so the area required for fenders is relatively large. Therefore, the truck uses large-size anti-skid patterned aluminum plates as the fenders.

5 bar aluminum tread plates are widely used in the planning of construction passages and other aspects. Because the 5 bars are arranged in relatively parallel planes and the intersection angle between each bar and other bars is 60-80 degrees, this pattern has an excellent anti-slip effect.

The conventional thickness of aluminum tread plates are 1.5mm, 2.0mm, 2.5mm, 3.0mm and 4.0mm. For suspended areas where workers need to step on them, it is recommended to use aluminum alloy checker plate with a thickness of not less than 6.0mm. That will maximize the safety of workers and ensure the service life of the aluminum sheets.

The thickness range of the aluminum plate is directly linked to the aluminum sheet price. The aluminum sheet with a thickness of 1-8mm has a relatively cheap price. Because the thinner aluminum sheet requires more machining, the price is slightly higher.

Those above 8mm must be produced by hot rolling after ingot processing. A certain amount of loss will occur during the ingot casting process. At the same time, the price of hot rolling equipment is relatively high, so the price of ultra-thick aluminum plates is high. Welcome to leave message below to inquire aluminum sheet prices 4x8.