PP Caps Material of 8011 Aluminum Sheet or Coil

8011 Aluminum sheet or coil is an ideal material for PP Caps of whiskey bottles and other beverage bottles. ROPP cap material can be ordered as rolled, degreased, pre-lubed, pre-treated and / or lacquered.

As superior PP caps material, 8011 aluminum sheet or coil is of light weight, superior barrier property and good formability. It is also good decoration for your goods. More importantly it is easily recycled.

Specification of Aluminum sheet Coil for PP Caps

Alloy	Temper	Thickness (mm)	Width(mm）	Sheet length
8011	H14, H24, H16, H26	0.16-0.23	Sheet	Strip	500-1500 75,150,300,350,505
500~1000	50~1500
Remark: special specifications can be produced accordingly to your requirement.
Chemical Composition
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Others
Each	Total
8011	0.5-0.9	0.6-1.0	0.1	0.2	0.05	0.05	/	0.1	0.08	0.05	0.15

Mechanical Property for Continuous Casting

Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.16~0.23¡¡	185~205	¨R2

Mechanical Property for Direct Casting

Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.16~0.23	125~155	¨R2