Gallery
Overview
| Series | 1050 |
| Temper | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38 |
| Thickness | 0.2-4.5 mm |
| Width | 100-2600 mm |
| Features | high corrosion resistance, electrical conductivity, and high plasticity,etc. |
| Series | 1050 |
| Temper | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38 |
| Thickness | 0.2-4.5 mm |
| Width | 100-2600 mm |
| Features | high corrosion resistance, electrical conductivity, and high plasticity,etc. |
1050 Aluminum sheet is a popular pure aluminum sheet, of which the aluminium content is over 99.50% according to international standards.
Therefore, it is of high plasticity, high corrosion resistance, good electrical conductivity and thermal conductivity, but it can’t be strengthened by heat treatment and its strength is very low. Find other types of aluminium sheets for sale.
Because of simple manufacturing process, its price is much cheaper than any other kinds of aluminum alloy.
It offers the best corrosion resistance compared to any alloy group.
It is of high plasticity, good electrical conductivity and thermal conductivity.
1. It is widely used in some cases where high corrosion resistance and formability are required but the strength is not high.
2. It can be used to make daily necessities, lighting equipment, reflectors, decorations, chemical industry containers, heat sinks, signs, electronics, lamps, electrical appliance,etc.
3. Chemical equipment is its typical use.
Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
1050 | O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H32,H34 H36,H38 | 0.2-4.5 | 100-2600 | 500-16000 |
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
Content | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | / | 0.07 | 0.05 | 0.15 | Reminder |
Alloy/Temper | Tensile strength(MPa) | Yield strength(Mpa) | Elongation(%) |
1050-O/1050-H111 | 65-95 | Min20 | Min 20 |
1050-H112 | Min75 | Min30 | Min20 |
1050-H12 | 85-125 | Min65 | Min 2 |
1050-H14 | 105-145 | Min 85 | Min 2 |
1050-H16 | 120-160 | Min100 | Min1 |
1050-H18 | Min135 | Min120 | Min1 |
1050-H19 | Min155 | Min140 | Min1 |
1050-H22 | 85-125 | Min55 | Min4 |
1050-H24 | 105-145 | Min75 | Min3 |
1050-H26 | 120-160 | Min90 | Min2 |
1050-H28 | Min140 | Min110 | Min2 |