Aluminum sheet is of wide application like thick aluminum plate for curtain walls, thin aluminum sheet for thermal insulation and medium-thick aluminum panels for equipment enclosures, etc. The following is a table of commonly used aluminum plate specifications for various purposes and some requirements of aluminum plate manufacturers for the length and width dimensions of aluminum plate specifications.
Aluminum sheet standard sizes
4X8 aluminum sheet(1200x2440) | 4x10 aluminum sheet(1200x3000) |
2.35*1220*24400 | 2.35*1000*2000 |
1.35*1220*24400 | 2.00*1100*2000 |
2.85*1220*24400 | 2.35*1500*4000 |
3.00*1220*24400 | 3.85*1220*2440 |
1. Common specifications of aluminum sheets in the curtain wall construction industry
These aluminum plate specifications are currently the most commonly used in the industry. The curtain wall industry is a main field in terms of the application of aluminum sheets. The commonly used specifications and size tables of these aluminum plates we have listed are summarized in combination with this, and we hope that they can have a certain reference value for everyone.
0.50*1200*C | 0.50*1000*2000 |
0.50*1000*C | 1.85*1200*2400 |
2. Common specifications and sizes of aluminum plates in the thermal insulation industry
These are the common specifications and size tables in the insulation aluminum sheet and insulation aluminum coil industry. Its common size is less for its application is relatively concentrated.
0.72*1200*2400 | 0.68*1000*2000 |
0.80*1000*300 | 1.00*1200*2400 |
3. Common specifications and dimensions of aluminum plates in the equipment housing industry
The aluminum plate specification size table used for the equipment shell is probably the most. For example, 0.58 and 0.86 are the most commonly used in enclosure equipment. For home appliance, the most commonly used is 2.0 thickness as the enclosure of refrigerators or cabinets.
Because the quality requirements are different, different customers have different requirements for the length and width dimensions of the aluminum plate specifications. The length and width tolerance of the aluminum plate specifications mainly depend on the use.
For example, in the curtain wall industry, the width tolerance of the aluminum plate should not be greater than +5mm. But for the aluminum insulation sheet, there are stricter requirements on the length and width dimensions of the aluminum plate specification.